Sale!

INMIZIVI USB RGB TV Background Light Strip Delivered by Amazon Warehouse

$13.99 $9.99

  • Buy on Amazon you can receive a $3 coupon and 15% bonus.
  • 【USB Powered】INMIZIVI TV backlight operates at a voltage of 5V, was powered by a TV USB port, can be turned on/off synchronously with most TV models. You also can use the power bank to light it up, portable, that you can use it easily outdoors. This version is waterproof, extremely low heat. (The remote control requires a CR2025 battery, but it's NOT included.)
  • 【Easy Installation】6.56ft TV backlights enough long to light up every side of your TV. No need to cut. The USB-powered light strip can be easily installed behind the TV. Unique stronger self-adhesive make sure the led strip better fixation on your TV.
  • 【 Mini Receiver】The mini infrared receiver at the end of the mini controller needs to be in an unobstructed state to avoid being obstructed and affecting the received signal. The control distance is 8-10m.
  • 【Waterproof 】 Waterproof ip65, suitable for indoors and outdoors use; Led lights for bedroom, dining room, kitchen, upstairs, porch, computer, Christmas tree, party, garage, corridor, eaves.
  • 【Customer service 】 Always stand behind our products; 24/7 support; 12 months warranty; when you choose our led light bar, our commitment to your satisfaction begins, as long as you have questions, you need to seek help, our customer's Service will not stop.
Category:

Item model: 6.56ft 24Key IR remote-controlled LED strip light

Features:

- Applications: Bias lighting for TV.
- Color is changeable: 16 colors and 4 play modes, dimmable.
- Rated voltage: DC 5v
- Energy-saving: save up to 85percent of energy, 40000Hrs long lifespan.
- 1 x 24Key remote

Precautions:

1. Before installation, please connect the light bar and the controller to test the led light bar in the direction corresponding to the arrow; LED light bar must be used below 5V

2. When using the remote control, please point the receiver at the controller. The best distance for remote control is within 10 meters. (The remote control requires batteries, but batteries are not included.) 3. Please wipe the surface of the equipment with cleaning paper as required and keep it clean;

4. Paste the LED light bar and connect the USB port to the power supply after your device.

5. The strip light is waterproof. It can be cleaned with a wet rag, but it is only suitable for cleaning the light strip.

6. If you have any questions about using the controller, you can refer to the setup guide in the manual.

Scroll to top